Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Liner & Rebuild Across Revere
Chimney liner replacement and partial rebuilds in Revere typically run $1,800-$4,500 depending on flue count and access, with most jobs completed in a single visit. If your Revere home’s chimney is showing exterior mortar loss, drafting poorly, or venting a wood stove through an unlined flue, a liner or rebuild isn’t something to defer - it’s the barrier between your heating exhaust and your living space. Call Hearthstone Chimney Co. at (857) 597-5950 for a free estimate with upfront pricing. Our crews are dispatched from our Boston office and serve Revere neighborhoods regularly, from Beachmont to the Shirley Avenue corridor.
Why Hearthstone Chimney Co. Is Revere’s Preferred Chimney Liner & Rebuild Company
We’ve been answering calls with a live person for over 42 years, and that hasn’t changed. When you call (857) 597-5950, day or night, you reach someone who can book your Revere appointment - not a callback queue, not an app.
Our Chimney Liner & Rebuild team knows Revere’s housing stock intimately. The triple-deckers and two-families off Ocean Avenue, the 1920s colonials near Revere Beach Parkway, the converted cottages tucked behind the reservation - we’ve worked on all of them. Revere homeowners leave reviews mentioning the same things: our techs show up uniformed and background-checked, they explain what the camera shows in plain English, and they don’t push work that isn’t documented.
We back every liner and rebuild with the 90-Day Done Right Promise in writing. If it’s not right, we come back. No paperwork to dig up, no arguing. That’s the Keystone Standard we’ve operated under since 1984.
Most Revere jobs finish in one visit because our trucks carry DuraFlex stainless liners, HeatShield refractory mortar, Gelco caps, and Olympia Chimney components - no waiting on parts.
Our Chimney Liner & Rebuild Services in Revere
Stainless Steel Liner Installation
A stainless steel liner is the right fix for most Revere wood stove and fireplace flues that have lost their original clay tile or were never lined at all. In the triple-deckers common along Broadway and Revere Street, we often find chimneys venting multiple appliances through a single unlined masonry flue - a setup that lets soot migrate between floors and creates a fire path no homeowner wants. We drop insulated DuraFlex stainless liners sized to each appliance’s BTU output and draft requirement, not a one-size-fits-all tube. For Revere’s coastal climate, we spec 316Ti alloy for wood-burning applications - the salt air that spalls your exterior brick will find any inferior metal.
Flexible Liner Systems
Some Revere chimneys have offsets, bends, or narrow flue passages that a rigid liner won’t navigate. The older homes near Beachmont, with their fieldstone foundations and settled masonry, often present exactly this problem. A flexible liner, properly insulated and supported at the top and bottom, achieves the same draft and safety performance without dismantling chimney walls. We use professional-grade flexible systems from DuraFlex and Olympia Chimney, not the thin-wall products sold at hardware stores. Installation includes a new top plate, storm collar, and cap from Gelco or Famco - the full termination assembly, because a liner is only as good as its seal against rain and salt spray.
Liner Replacement
When clay tile flues crack, shift, or glaze with third-degree creosote, sweeping doesn’t restore them - replacement does. This is the most common liner job we perform in Revere, especially in homes where a wood stove has been installed into a fireplace flue never designed for its exhaust temperature. The combination of coastal humidity and lower-BTU modern heating through oversized flue passages produces Stage 2 and glazed creosote faster than inland sweeps expect. We remove the damaged liner (or confirm an unlined chimney), inspect the surrounding masonry with our camera, and install a new insulated system that matches the appliance. You’ll see the photos, you’ll get the plain-English verdict, and you’ll know the exact cost before we start.
Partial Chimney Rebuild
Revere chimneys fail from the outside in. Salt-laden Atlantic air and nor’easter freeze-thaw cycles spall brick and pop mortar joints along Ocean Avenue and the Revere Beach Parkway corridor while the interior flue still reads passable on camera. Our crews probe crowns and upper courses by hand - a step that isn’t standard a mile inland in Malden or Everett. When we find hollowed mortar or a cracked crown, we rebuild from the roofline up using matching brick and professional-grade refractory mortar. A partial rebuild preserves sound lower masonry while replacing what’s compromised, and it’s often the difference between a $2,400 repair and a $12,000 full teardown.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Revere
We don’t use builder-grade substitutes. Our Revere trucks stock DuraFlex stainless liners, HeatShield cerfractory flue resurfacing systems, Gelco chimney caps and dampers, Olympia Chimney termination components, and Famco flashing and sealants. These are the brands specified by manufacturers who warranty their products - and we warranty our installation. For Revere homeowners, this means no waiting on special orders. When our tech identifies the problem, the right part is usually on the truck. If your cap blew off in a nor’easter or your crown cracked after a hard freeze, we can often replace it same visit.
Common Chimney Liner & Rebuild Problems We See in Revere Homes
- Original unlined multi-flue masonry in 1920s-1940s two- and triple-deckers lets soot cross-contaminate between floors’ appliances. Lower-BTU modern heating vented through oversized flue passages breeds heavy creosote that a standard sweep won’t fully remove. We identify each flue separately and recommend liner isolation where needed.
- Salt-air spalling and popped mortar joints on crowns, caps, and upper courses go unnoticed because the interior flue still drafts. Rebuilds get deferred until a section is structurally compromised. Our hand-probing catches this early, before water intrusion destroys the wythe.
- Wood stoves run as primary heat in coastal humidity build Stage 2 and third-degree tar glaze fast. A brush alone won’t touch a glazed flue. It needs a liner replacement with proper insulation and a correctly sized flue, plus honest guidance on burning practice that reduces buildup.
- Triple-decker chimneys with multiple flues often have hidden partition failures between flue passages. Our camera inspection maps each flue’s condition, and we mark them permanently so future sweeps don’t confuse one tenant’s vent with another’s.
Pricing for Chimney Liner & Rebuild in Revere, MA
Here’s what liner and rebuild work costs in Revere’s market:
| Service | Typical Range in Revere |
|---|---|
| Single-flue stainless steel liner (insulated) | $1,800 - $2,800 |
| Multi-flue liner system (2-3 flues) | $2,800 - $4,200 |
| Flexible liner with offset navigation | $2,200 - $3,400 |
| Partial rebuild (crown + upper courses) | $1,600 - $3,200 |
| Full chimney rebuild (above roofline) | $4,500 - $8,500 |
| HeatShield flue resurfacing (suitable flues only) | $1,200 - $2,000 |
What moves the number: flue count, chimney height, access (steep roof, narrow alley), whether the crown is salvageable, and if we find hidden partition damage during camera inspection. We give you the full price before any work begins - the number on the estimate is the number on the invoice. Senior and veteran discounts apply (5% permanent discount). Free second opinion on any written estimate from another company. Call (857) 597-5950 for your exact quote.
We Also Serve Cities Near Revere
Our crews work Chimney Liner & Rebuild in Revere and the surrounding communities regularly - Chelsea, Everett, Nahant, and Boston itself. Dispatch is coordinated from our Boston office, so response times to these neighborhoods stay tight. If you’re in one of these cities and found this page, the same pricing, same brands, and same 90-Day Done Right Promise apply.
Serving Revere, MA - Our Local Coverage Area
We’re based in the Revere area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Revere
Revere sits directly on the Atlantic, and Revere Beach runs the full eastern edge of the city - that salt-laden air accelerates mortar decay at a rate Everett’s inland position simply doesn’t experience. Combined with nor’easter freeze-thaw cycles, the outer courses of Revere chimneys take a beating that shows up as spalling brick and loose joints while the interior flue still looks fine. We hand-probe crowns and upper courses on every Revere inspection to catch this before it becomes structural. Call (857) 597-5950 for a free inspection.
As primary heat, sweep every season - and in Revere’s coastal humidity, consider mid-season inspection if you’re burning daily. The moisture in the air raises flue condensation, which accelerates creosote formation beyond what dry-climate charts suggest. We also recommend shorter splits (seasoned 12+ months) and hotter fires to reduce glazed buildup that demands liner replacement instead of sweeping. Call (857) 597-5950 to book before burning season starts.
Yes. We identify and isolate each flue before any work begins, and we mark them permanently for future sweeps. In Revere’s dense stock of multi-family housing, cross-contamination is a real risk when flues share a common wall or have damaged partitions. Our camera inspection maps the exact condition of each flue, and we document it with photos you can see. If partitions are breached, we recommend repair or liner isolation before the next heating season. Call (857) 597-5950 to schedule.
Yes. NFPA 211 requires a Level 2 internal inspection - camera and all - before any liner installation or chimney modification. In Revere, this is especially important because salt-air damage often hides in the upper courses where a visual inspection from below misses it. Our Level 2 ends with photos, a plain-English verdict, and a written estimate. No work proceeds without your approval of what we found. Call (857) 597-5950 to book your Level 2.
A stainless liner replaces the flue surface entirely, which eliminates glazed creosote - but the chimney must be properly cleaned first, and the liner must be insulated and correctly sized to the appliance. In Revere, we often see third-degree glaze in wood stove flues that were “swept” with a brush that only polished the surface. We remove the glaze mechanically, inspect the masonry, then install the liner. The owner also gets burning guidance to prevent recurrence. Call (857) 597-5950 for an exact assessment.
Ready to protect your Revere home? Call Hearthstone Chimney Co. at (857) 597-5950 for a free estimate. A live person answers 24 hours a day, 7 days a week. We’ll be there when we say, show you the photos, and stand behind the work - in writing, no arguing.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Revere and local communities since 1984.