Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Liner & Rebuild Across Everett
Chimney liner installation and chimney rebuild in Everett typically runs $1,800-$6,500 depending on whether we’re dropping a stainless liner into a single flue or rebuilding a shared triple-decker stack from the roofline down. Most Everett jobs are booked within a week and completed in one visit, with our crews dispatching from the Boston office to reach the city’s dense triple-decker neighborhoods quickly. Call (857) 597-5950 - a live person answers, every hour of every day.
We’ve been working on Everett chimneys for over 42 years. We know the difference between a Chelsea Avenue two-family and a Glendale Park three-decker, and we know that “one chimney” in Everett usually means three flues, three households, and a century of layered heating conversions that no suburban sweep has encountered.
Why Hearthstone Chimney Co. Is Everett’s Preferred Chimney Liner & Rebuild Company
Everett homeowners call us because we document what we find. Our Chimney Liner & Rebuild team runs Level-2 camera inspections on every stack, and you get the photos plus a plain-English verdict - no jargon, no scare tactics, no repair pushed without evidence you can see yourself.
Russell Haines built this company in 1984 on the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. That still governs how we treat every Everett triple-decker - whether you’re the owner-occupant on the first floor or the landlord who’s never seen the flue serving the third-floor tenant.
Our technicians are background-checked, uniformed, and trained to work in tight urban roof conditions. Most jobs finish in a single visit. The price we quote is the price on the invoice - no surprises on the bill. And every repair is backed by our 90-Day Done Right Promise in writing: if it’s not right, we make it right, no paperwork, no arguing.
Calls come to a live person 24 hours a day, 7 days a week. Not a callback queue. Not an app.
Our Chimney Liner & Rebuild Services in Everett
Stainless Steel Liner Installation
Most Everett triple-deckers we inspect have at least one flue venting a modern gas appliance through an oversized, unlined coal-era chimney. A stainless steel liner from DuraFlex or Olympia Chimney shrinks that flue to the correct diameter, contains acidic condensate, and protects the old brick from further saturation. In Everett’s salt-air climate near the Mystic River, that protection matters - the brick is already under stress from spalling and mortar erosion. A stainless liner typically runs $1,800-$3,200 installed in Everett, including the Level-2 inspection and photo report.

Flexible Liner Installation
Some Everett stacks have offsets or bends from a century of settling that rigid pipe cannot navigate. A flexible liner, properly sized and insulated, follows those curves while still meeting NFPA 211 standards. We see this need often in the narrower wood-frame triple-deckers off Broadway and Chelsea Street, where the chimney was built for coal heat and never structurally modified. Flexible liner jobs in Everett generally fall between $2,200-$3,800 depending on length and access.

Liner Replacement & Liner Repair
Not every damaged liner needs full replacement. If we find a cracked clay flue tile or localized deterioration in an otherwise sound stack, HeatShield cerfractory flue sealant can restore a smooth, insulated surface without tearing out the existing structure. This saves Everett homeowners significant cost when the damage is contained. Liner repair with HeatShield runs $800-$1,500 in Everett; full liner replacement when the existing system is beyond salvage runs $2,500-$4,500. We show you the camera footage and tell you straight which path makes sense.

Partial & Full Chimney Rebuild
When salt-air erosion, freeze-thaw cycles, and decades of unlined gas venting have compromised the masonry itself, we rebuild. A partial rebuild addresses the chimney crown, upper courses of brick, and deteriorated mortar joints - common in Everett after a hard winter. A full rebuild removes the stack to the roofline or below and reconstructs with matching brick and proper flue separation. Partial rebuilds in Everett typically run $3,500-$5,500; full rebuilds on triple-decker stacks range from $5,500-$8,500 depending on height, scaffolding needs, and whether we’re separating previously shared flues.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everett
We stock professional-grade materials from HeatShield, Gelco, and Olympia Chimney - no builder-grade substitutes. For Everett’s triple-decker market, that means we can often source the correct liner diameter and fitting without the delays that push suburban sweeps into a second visit. HeatShield’s cerfractory sealant handles the localized flue repairs we encounter in century-old brick. Gelco caps and crowns protect rebuilt stacks from the salt-laden river air that accelerates deterioration. Olympia Chimney’s stainless systems carry the UL listings required for Everett’s multi-unit insurance inspections. We keep common sizes on hand because Everett’s housing stock is consistent - and consistently demanding.
Common Chimney Liner & Rebuild Problems We See in Everett Homes
- Gas appliance vented through unlined coal-era flue. In Everett’s rental-heavy triple-deckers, we repeatedly find furnaces and water heaters venting into oversized flues built for coal, later adapted for oil, never relined for gas. The acidic condensate soaks and cracks old brick from the inside - a failure mode endemic to the city that often goes undetected until a landlord faces a full rebuild.
- Shared-flue cross-contamination between units. When one unit’s appliance draft is weak or a damper fails, flue gases or creosote odors can migrate into a neighbor’s fireplace or furnace flue because the stack lacks proper separation and sealing. We inspect all flues in a shared stack to map these pathways.
- Salt-air masonry decay accelerated by Mystic River exposure. Everett’s location pulls in corrosive salt-laden air that sunder mortar joints and spalls brick faster than in dry inland towns like Woburn just miles north. Freeze-thaw cycles compound the damage on already-aged masonry.
- Tight roof access delaying inspection and repair. Dense triple-decker blocks force ladder work close to neighboring roofs and overhead wires, making Level-2 inspections slower and more hazardous. Spalling mortar and failing crowns often go unrepaired through multiple freeze-thaw seasons because access is difficult - until the stack requires full rebuild.
Pricing for Chimney Liner & Rebuild in Everett, MA
| Service | Typical Range in Everett |
|---|---|
| Stainless steel liner (single flue) | $1,800 - $3,200 |
| Flexible liner (offset/bent flue) | $2,200 - $3,800 |
| Liner repair (HeatShield sealant) | $800 - $1,500 |
| Full liner replacement | $2,500 - $4,500 |
| Partial chimney rebuild | $3,500 - $5,500 |
| Full chimney rebuild (triple-decker stack) | $5,500 - $8,500 |
What moves the number? Height and scaffolding requirements on tight Everett lots. Whether we’re lining one flue or separating three. The condition of the existing masonry - salt-air damage can extend deeper than surface spalling suggests. And access: some triple-decker roofs require specialized rigging.
We provide no-hassle upfront pricing before any work begins. The estimate is free, includes the Level-2 camera inspection with photos, and the number we quote is the number on the invoice. Call (857) 597-5950 for an exact quote on your stack.
We Also Serve Cities Near Everett
Our crews work throughout the metro area, and we regularly handle Chimney Liner & Rebuild in Everett alongside neighboring Chelsea, Revere, Somerville, and Boston. The same triple-decker housing stock, salt-air exposure, and shared-flue challenges appear across these communities, and we bring the same documentation and plain-English reporting to every job.
Serving Everett, MA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Liner & Rebuild in Everett
Yes. In Everett’s shared-stack triple-deckers, we inspect every flue in the chimney before relining any single run, because deterioration in one flue often affects the separating masonry or reveals systemic problems - cracked chimney crown, failed mortar joints, or cross-contamination pathways - that would compromise your new liner. We document each flue with camera footage and give every unit’s owner or tenant a clear report. Call (857) 597-5950 to schedule a full-stack inspection.
Urgent enough to inspect this season. An unlined, oversized coal-era flue venting a modern gas furnace allows acidic condensate to saturate and crack old brick from the inside, and in Everett’s salt-air environment that brick is already stressed. The failure is often silent until the stack requires full rebuild. A Level-2 camera inspection will show whether the flue is intact or actively deteriorating - and we’ll tell you honestly if it can wait a year or needs immediate attention. Estimates are free; call (857) 597-5950.
Yes, and we see it regularly. When flues in a shared stack lack proper separation, or when a damper fails or draft is weak, combustion byproducts from one unit can migrate into another’s living space. This is not a tenant problem - it’s a chimney structure problem. We map the airflow pathways with smoke testing and camera inspection, then seal separations or recommend relining to isolate each flue. If you’re smelling your neighbor’s fire, call (857) 597-5950 for a full-stack evaluation.
First-degree creosote - light, sooty, brushable - still needs removal, especially in a shared Everett stack where it can restrict draft and contribute to cross-contamination between units. More critically, first-degree creosote often masks deeper problems: an unlined flue, a cracked tile, or acidic condensate damage that only camera inspection reveals. We don’t clean and leave; we inspect and report. Call (857) 597-5950 to book a sweep with full documentation.
Not necessarily, but the conditions that destroyed the crown and spalled the brick - salt-air exposure, freeze-thaw cycling, and internal moisture from an unlined or damaged flue - often damage the liner simultaneously. We run the camera to check. Sometimes the liner is intact and the masonry repair is straightforward. Sometimes the flue is cracked and saturated, requiring liner replacement alongside the rebuild. You get the photos, the plain-English verdict, and an honest recommendation on what can wait and what cannot. Call (857) 597-5950 for a free estimate.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Everett and local communities since 1984.





Before
After
Before
After
Before
After