Famco Chimney Repair Nationwide

Famco Chimney Repair in Boston: What to Know First

We provide independent Famco chimney repair in Boston, and most jobs are completed in a single visit with the parts already on our truck. Typical turnaround from your call to finished work is two to five business days, depending on weather and parts. We charge upfront, flat-rate pricing - the number on the estimate is the number on the invoice, and estimates are free.

Call (857) 597-5950

This page is for Boston homeowners who have a Famco chimney cap, damper, or venting component that is leaking, stuck, corroded, or no longer sealing properly. If your fireplace smokes into the room, water stains the ceiling near the chimney, or the damper will not open or close fully, we can diagnose it and fix it. Call (857) 597-5950 and a live person will answer, 24 hours a day.

How Famco Products Fail - and How We Fix Them

• Famco WC wind-directional chimney caps - The stainless hood and base hold up well, but the riveted wind-directional fins on Boston’s coastal exposure seize after five to seven years of salt-air cycling. We see this in East Boston and Southie especially. We free the assembly, replace the rivets with marine-grade hardware, and reseat the cap with a proper storm collar. If the base is too far gone, we fabricate a replacement from Famco-compatible stock or source direct.
• Famco BD barometric draft dampers - The weighted aluminum blade warps from creosote buildup and repeated heating cycles, causing the damper to hang open or slam shut. This throws off your draft and can pull combustion air the wrong way. We remove the blade, check the shaft bushings for ovaling, and install a calibrated replacement with the correct weight spec for your flue size. We test draft pressure before we leave.
• Famco RC round chimney caps with mesh screen - The 304 stainless mesh on older RC series is woven too fine for Boston’s heavy pollen and cottonwood season; it clogs, traps moisture, and accelerates corrosion at the weld points. We clean or replace the screen with a heavier 316-grade mesh, and we spot-weld any frame cracks. On coastal jobs, we recommend upgrading to the 316L base model, which Famco offers but few installers stock.
• Famco SD sliding chimney dampers - The cast-iron frame cracks where the slide plate meets the throat, usually from over-tightening during original installation or from thermal shock when a chimney fire has occurred. We measure the throat opening, source a replacement SD damper or machine a custom plate if the frame is still square, and reset it with proper clearances so it slides freely cold and hot.
• Famco chimney fans and exhausters - The motor bearings fail after a decade of seasonal use, and the replacement motor must match the exact RPM and static pressure rating or the fan will cavitate and make noise. We carry the common Famco motor specs on our truck, and if yours is an oddball, we cross-reference to a Grainger or Fasco equivalent that meets the OEM performance curve. We never guess on fan swaps.

Our Famco Chimney Repair Process

1. 1
   Call and schedule. A live person answers, notes your symptoms, and books a Level-2 camera inspection. We do not diagnose over the phone.
2. 2
   Inspection and documentation. Our technician arrives in uniform, runs a camera up the flue, and photographs every defect. You see the photos on a tablet while we explain what is wrong, what caused it, and what happens if you wait.
3. 3
   Parts decision. For Famco components, we check whether OEM is available and cost-justified, or whether a quality aftermarket equivalent from DuraFlex, HeatShield, or Gelco will outlast the original at lower cost. We explain the trade-off and you decide. No surprises.
4. 4
   Repair and testing. Most Famco repairs are completed in one visit. We pressure-test seals, verify damper operation across the full temperature range, and confirm draft with a manometer.
5. 5
   Written guarantee. You receive a photo report, a plain-English invoice, and our 90-Day Done Right Promise in writing. If it is not right, we come back. No paperwork, no arguing.
6. 6
   Cleanup and follow-up. We haul away old parts and leave the work area as we found it. Our office calls within a week to confirm you are satisfied.

What Famco Chimney Repair Costs in Boston

These are real ranges for Famco chimney repair work we have performed in Boston homes within the past eighteen months. Your exact price depends on access height, parts availability, and whether we find additional damage once the component is removed.

What moves the price up: three-story walk-up with no roof access, rot in surrounding framing, or a discontinued Famco part that must be custom-fabricated. What keeps it down: catching the problem before water damages the surrounding masonry. Call (857) 597-5950 for an exact quote - estimates are free.

Why Boston Homeowners Call Hearthstone Chimney Co. for Famco Work

We are not a price-cutting chain, and we are not a one-truck operator who may answer the phone next year. We have been in business since 1984, and we plan to be here when your Famco cap needs its next service in 2035.

Our technicians are background-checked, uniformed, and trained on Famco’s product line specifically, not just generic chimney work. We carry DuraFlex, HeatShield, and Gelco materials so we are not single-source dependent if a Famco part is backordered. Every job gets a Level-2 camera inspection with photos you can see and a plain-English verdict. Our 90-Day Done Right Promise is in writing, with no arguing - if it is not right, we come back. Russell Haines, our owner, learned the trade at Los Angeles Trade-Technical College and has spent more than two decades in the chimney trade, including twenty years seeing what New England winters do to a flue that nobody has touched in ten years. He keeps a rescued mutt named Cobb who rides along on early jobs and has strong opinions about every parking spot in the city.

If the chimney’s doing its job, you won’t notice it. You hire us so it stays that way.

FAQs